Alesis Adat Xt Service Manual4/19/2021
If you want your ADAT restored dont hesitate to give us a call.Place the ADAT facing forwards on a clear surface, remove the top cover.On exiting from the rotating heads the tape passes around P3 inclined and roller guide across the linear head and P4 fixed guide and from there through the capstan shaftpinch roller and onto the take-up hub.Unless you have specialist rubber cleaner, leave the pinch roller cleaning until its next service.
The scanner rotates in a counter-clockwise direction at high speed. The heads themselves are located at the bottom of the scanner in recesses. Their alignment is critical and should not be disturbed under any circumstances. ![]() While applying GENTLE pressure to the drum rotate the upper half or scanner ANTI-CLOCKWISE 20 times, using the round rotor board that is secured to its top. Continue cleaning until no more residues appear on the cloth, do not let the cloth dry out. As this does not spin a cotton swab moistened with alcohol will suffice. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |